THEORETICAL STUDY OF THE NOISE EMISSION OF THE FLEXIBLE CONNECTION OF THE ABRASIVE BELT-GRINDING WOODWORKING MACHINES

Authors

  • Natalya Chukarina
  • Viktoriia Vasilyeva
  • Valery Kirpichnikov
  • Natalia Tourkina

DOI:

https://doi.org/10.36336/akustika202139157

Abstract

This paper presents the results of theoretical studies of the drive belting and grinding belts` acoustic characteristics as elements
of flexible connections, that fundamentally distinguishes them from bobbin sanding and cylinder-grinding woodworking machines. It also has the significant differences in comparison with other sources in terms of stiffness and tension forces. The choice of the noise source models is justified by the characteristic features of the kinematics of the machine tools and the grinding technological process. The arrangement of the machines` acoustic system of chosen group suggests that the main sources of energy radiation are: grinding belts and belt drives of the work pieces and grinding units, ground work pieces, electric motors. It is compared the expected noise levels with sanitary standards for determining the excess and the sources that generate them. These data are the main information for the acoustic calculation and design of the noise reduction systems of the above sources at the design stage in such woodworking equipment, and it also determines the acoustic efficiency of the noise protection systems and consider to design these systems in accordance with the implementation of the sanitary noise standards at the machine operator workplaces.

Downloads

Published

2021-07-26

How to Cite

Chukarina, N., Vasilyeva, V., Kirpichnikov, V., & Tourkina, N. (2021). THEORETICAL STUDY OF THE NOISE EMISSION OF THE FLEXIBLE CONNECTION OF THE ABRASIVE BELT-GRINDING WOODWORKING MACHINES. Journal Akustika, 39(39). https://doi.org/10.36336/akustika202139157

Issue

Section

TEMPLATE